manufacture high quality scuba diving regulator

Product Description

Product pictures

                                   scuba diving for sale-- FS-813A

Sample Room

  work shop

FAQ

1.  Before using this regulator or diving in cold water(below 50°F or 10°C),you must have successfully completed training and certifacation in the technique of scuba diving from a recognized certification agency.

2.Installation/disassembly of the regulator must be operated by a trained and certified repair technician to avoid risk of injury or death.Unauthorized alterations/tampering of the redulator are at the sole risk of the user,and effectively nullify any and all warranties.

3.Before using this regulator,make sure that there is no crack or attrition on the regulator.In case the regulator thread is cracked,or damaged,do not use the regulator.

4.O-ring seals can wear out with normal use and must be promptly replaced to avoid flooding the instrument.

5.Always pressurize the regulator gradually by opening the cylinder valve slowly.

6.Rinse your instruments in clean,fresh water and air dry at the end of each diving day and have your instruments inspected and serviced at least once per year by a qualified repair technician.

7.If you use this regualtor with Nitrox,do not use pure oxygen or any gas mixture exceeding 40% oxygen.Failure to comply with the above warning could cause serious personal injury or death from fire or explosion.

      This regulator has been tested and strictly inspected prior to leaving the factory to assure quality performance. sale-- FS-813A

Sample Room

  work shop

FAQ

1.  Before using this regulator or diving in cold water(below 50°F or 10°C),you must have successfully completed training and certifacation in the technique of scuba diving from a recognized certification agency.

2.Installation/disassembly of the regulator must be operated by a trained and certified repair technician to avoid risk of injury or death.Unauthorized alterations/tampering of the redulator are at the sole risk of the user,and effectively nullify any and all warranties.

3.Before using this regulator,make sure that there is no crack or attrition on the regulator.In case the regulator thread is cracked,or damaged,do not use the regulator.

4.O-ring seals can wear out with normal use and must be promptly replaced to avoid flooding the instrument.

5.Always pressurize the regulator gradually by opening the cylinder valve slowly.

6.Rinse your instruments in clean,fresh water and air dry at the end of each diving day and have your instruments inspected and serviced at least once per year by a qualified repair technician.

7.If you use this regualtor with Nitrox,do not use pure oxygen or any gas mixture exceeding 40% oxygen.Failure to comply with the above warning could cause serious personal injury or death from fire or explosion.

      This regulator has been tested and strictly inspected prior to leaving the factory to assure quality performance.

Product pictures

                                   scuba diving for sale-- FS-813A

Sample Room

  work shop

FAQ

1.  Before using this regulator or diving in cold water(below 50°F or 10°C),you must have successfully completed training and certifacation in the technique of scuba diving from a recognized certification agency.

2.Installation/disassembly of the regulator must be operated by a trained and certified repair technician to avoid risk of injury or death.Unauthorized alterations/tampering of the redulator are at the sole risk of the user,and effectively nullify any and all warranties.

3.Before using this regulator,make sure that there is no crack or attrition on the regulator.In case the regulator thread is cracked,or damaged,do not use the regulator.

4.O-ring seals can wear out with normal use and must be promptly replaced to avoid flooding the instrument.

5.Always pressurize the regulator gradually by opening the cylinder valve slowly.

6.Rinse your instruments in clean,fresh water and air dry at the end of each diving day and have your instruments inspected and serviced at least once per year by a qualified repair technician.

7.If you use this regualtor with Nitrox,do not use pure oxygen or any gas mixture exceeding 40% oxygen.Failure to comply with the above warning could cause serious personal injury or death from fire or explosion.

      This regulator has been tested and strictly inspected prior to leaving the factory to assure quality performance. sale-- FS-813A

Sample Room

  work shop

FAQ

1.  Before using this regulator or diving in cold water(below 50°F or 10°C),you must have successfully completed training and certifacation in the technique of scuba diving from a recognized certification agency.

2.Installation/disassembly of the regulator must be operated by a trained and certified repair technician to avoid risk of injury or death.Unauthorized alterations/tampering of the redulator are at the sole risk of the user,and effectively nullify any and all warranties.

3.Before using this regulator,make sure that there is no crack or attrition on the regulator.In case the regulator thread is cracked,or damaged,do not use the regulator.

4.O-ring seals can wear out with normal use and must be promptly replaced to avoid flooding the instrument.

5.Always pressurize the regulator gradually by opening the cylinder valve slowly.

6.Rinse your instruments in clean,fresh water and air dry at the end of each diving day and have your instruments inspected and serviced at least once per year by a qualified repair technician.

7.If you use this regualtor with Nitrox,do not use pure oxygen or any gas mixture exceeding 40% oxygen.Failure to comply with the above warning could cause serious personal injury or death from fire or explosion.

      This regulator has been tested and strictly inspected prior to leaving the factory to assure quality performance.

manufacture high quality scuba diving regulator